Unlike the commercial grinders this specially built unit grinds at twice the RPM. Close inspection of the ground surface (in the picture on the right) reflects a mirror type finish equal to that of a new machine taper. Due to the strength of the grinding head our specially built unit creates a surface that has maximum contact with the tool holder. On weaker units (others in the field) deflection is excessive in grinding an ID removing excessive amounts of metal which results in poor contact of the tool holder with the spindle taper. This material is very valuable and should be saved whenever possible for future regrind if ever need be. Our process has been applied for more then 20 years now and with great results and success at a great saving for end user. |